X-ray sources · ZRFM / ZRF Series
DTXR-517ZRF
A rotating-anode source with 5 kW continuous fluoroscopy and 17 kW exposure and pulsed operation.
- Output power
- 17 kW
- Output voltage
- 40–130 kV
- Power input
- 220 V AC ±10%, 50–60 Hz
Specifications
Power & general parameters
| Output power | Continuous fluoroscopy 5 kWexposure / pulsed fluoroscopy 17 kW |
|---|---|
| Power supply | 220 V AC ±10%, 50–60 Hz |
| Inverter frequency | 500 kHz ±5% |
| kV accuracy | ±4% |
| mA accuracy | ≤ ±5% (mA >25 mA, ms >5)≤ ±(10% +1 mA) (mA ≤25 mA) |
| Anode | Rotating anode |
Exposure parameters
| Exposure voltage | 40–130 kV, 1 kV step |
|---|---|
| Exposure current | 10–250 mA |
| Exposure time | 1–6,300 ms |
| mAs range | 0.1–320 mAs |
| Exposure time accuracy | ≤ ±(5% +0.2 ms) |
| mAs accuracy | ≤ ±(5% +0.2 mAs) |
Fluoroscopy parameters
| Fluoroscopy voltage | 40–125 kV |
|---|---|
| Continuous fluoroscopy current | 0.5–6 mA |
| Pulsed fluoroscopy current | 10–40 mA, accuracy 10% |
| Fluoroscopy frame rate | 1–30 F/s |
| Pulse width | Supports 0.1 s, depending on frame rate |
X-ray tube parameters
| Supported tube power | 17 kW |
|---|---|
| Focal spot | Small 0.3large 0.6 |
| Exposure duty cycle | 1:60 |
| Supported small-focus current | 100 mA |
| Supported large-focus current | 350 mA |
| Anode heat capacity | 150 kJ (200 kHU) |
Interfaces, modes & mechanics
| Communication interface | RS-232 |
|---|---|
| Dimensions | Control box 410 × 310 × 410 mmmonoblock 342 × 180 × 210 mm |
| Weight | Control box 26 kgmonoblock 20 kg |
| Exposure modes | kV–mAs / kV–mA–ms |