X-ray sources · DTCB-05 Series
DTCB-05R
A rotating-anode X-ray source with a monoblock and inverter for exposure and fluoroscopy.
- Output power
- 5 kW
- Output voltage
- 40–125 kV
- Power input
- 220 V AC ±10%, 50 Hz
Specifications
Power & general parameters
| Output power | Exposure 5 kWpulsed fluoroscopy 5 kWcontinuous fluoroscopy 500 W |
|---|---|
| Power supply | 220 V AC ±10%, 50 Hz |
| Inverter frequency | 300 kHz ±5% |
| kV accuracy | ±4% |
| Anode | Rotating anode |
| mA accuracy | ≤ ±5% (mA >25 mA, ms >5)≤ ±(10% +1 mA) (mA ≤25 mA) |
| Inherent filtration | 2.1 mm Al (tube 0.6 mm Almonoblock 1.5 mm Al) |
Exposure parameters
| Exposure voltage | 40–125 kV, 1 kV step |
|---|---|
| Exposure current | 10–100 mA |
| Exposure time | 2–4,000 ms |
| mAs range | 0.1–200 mAs |
| Exposure time accuracy | ≤ ±(5% +0.2 ms) |
| mAs accuracy | ≤ ±(5% +0.2 mAs) |
Fluoroscopy parameters
| Fluoroscopy voltage | 40–125 kV, 1 kV step |
|---|---|
| Continuous fluoroscopy current | 0.5–6 mA, 0.1 mA step |
| Pulsed fluoroscopy current | 10–50 mA, 0.5 mA step |
| Fluoroscopy frame rate | 1–30, step 1 |
X-ray tube parameters
| Supported tube power | 17 kW |
|---|---|
| Focal spot | Small 0.3large 0.6 |
| Exposure duty cycle | 1:60 |
| Supported small-focus current | 100 mA |
| Supported large-focus current | 350 mA |
| Leakage radiation loading factors | 125 kV / 0.24 mA |
| Target material | Tungsten |
| Anode heat capacity | 150 kJ (200 kHU) |
Interfaces, modes & mechanics
| Communication interface | RS-232 |
|---|---|
| Dimensions | Inverter 430 × 305 × 100 mmmonoblock 305 × 138 × 243 mm |
| Weight | Inverter 6 kgmonoblock 21 kg |
| Exposure modes | kV–mAs / kV–mA–ms |
| APR entries | Supports 2,000 entries |